Skip to content
Gateways

Adyen vs Stripe: Level 2 and Level 3 data compared

Adyen and Stripe side by side for Level 2 and Level 3 data: where it goes, what each checks, what happens when it fails and how to see the result.

Last reviewed Nov 20, 2026
On this page

Adyen and Stripe both carry Level 2 and Level 3 data to Visa and Mastercard, and on both a US commercial card sale can reach the same lower interchange rate. What differs is how you send the data, what each gateway checks before passing it on, and what happens when something is wrong. This guide puts the two side by side, for businesses that accept corporate, purchasing or business cards and for platforms that process for B2B sellers.

It covers US domestic commercial card sales. On both gateways, savings from lower interchange only reach you on Interchange++ (IC+) pricing; on blended pricing, the difference stays with the gateway.

Side by side

AdyenStripe
Name of the featureEnhanced Scheme Data (ESD)Payment line items
Where the data goesenhancedSchemeData.levelTwoThree, in the Checkout API since v70amount_details and payment_details on the PaymentIntent, since API version 2025-10-29.clover
When to send itPayment request with automatic capture; capture request with manual, partial or multiple capturesCreate, confirm, update or capture; once is enough unless the captured amount changes
Item description that reaches VisaUp to 26 charactersFirst 26 alphanumeric characters, cut silently
Product code and commodity codeUp to 12 characters eachUp to 12 characters each
Unit of measureUp to 3 characters, such as EAUp to 12 characters, such as "item"
Totals that do not add upData dropped, payment goes throughRequest rejected by default
Generic descriptions on VisaData dropped for blank, single character, merchant name or only generic wordsNot checked
Visa Level 2Not sent since April 1, 2026No separate rate since April 2026, except fuel
Where to see the resultESD validation result in webhooks; Payment accounting report with ICSF detailsTransaction-level fees report (IC+); CEDP report in Network Cost Insights

Where the data goes

Adyen takes Level 2 and Level 3 data as one type of Enhanced Scheme Data, in a structured object with item lines in an array. Amounts and quantities are integers in minor units. Older integrations sent ESD as flat keys in additionalData; Checkout API v72, released on April 15, 2026, removed that path, so a v72 request with ESD in additionalData fails validation. A request carries only one ESD type, so Level 2 and Level 3 cannot be combined with airline, car rental or lodging data.

Stripe takes the order totals and line items in amount_details, and the order and customer references in payment_details, with up to 200 line items per payment. Amounts are integers in the smallest currency unit. If you use Stripe Checkout, Billing, Invoicing or Subscriptions, Stripe fills part of the line items from your Products and Prices, so your product catalog becomes your Level 3 data. Line items cannot be combined with car rental, lodging or airline data on the same payment either.

On both, the rule for partial captures is the same: when the captured amount differs from the authorized amount, send the data again with the capture.

What each one checks

Both gateways check format and arithmetic. Neither decides whether your data is good enough for the card networks.

Adyen checks that each line total equals quantity times unit price minus the line discount, and that the payment amount equals the line totals plus freight plus tax. For Level 2, tax has to be between 0.1% of the amount and 22% on Visa or 30% on Mastercard; that floor does not apply to Level 3. On Visa, Adyen also drops descriptions that are blank, a single character, only special characters, the same as the merchant name or only generic words such as "product" or "service".

Stripe checks that unit cost times quantity, plus tax and shipping, minus discount, equals the payment amount, and that every line has a product name, quantity and unit cost. It does not judge whether a description or product code is specific enough, and it does not check whether the tax is right for the jurisdiction.

Passing either gateway's checks is not the same as qualifying. Visa CEDP reviews the content of the data, and a description that clears Adyen's or Stripe's format rules can still be too generic for Visa.

What happens when the data fails

This is the biggest practical difference between the two.

What is wrongAdyenStripe
Totals do not add upPayment goes through; Level 2 and Level 3 data droppedRequest rejected with an error, by default
A required field is missingPayment goes through; all Level 2 and Level 3 data droppedRequest rejected with an error
Error only in Level 3Level 3 dropped, Level 2 sent; on Visa, no reduced rateNot documented
Mismatch with rejection turned offNot applicablePayment goes through; line items not sent to the networks
Merchant category not eligiblePayment goes through without the dataSale does not qualify
Description longer than 26 charactersField limit is 26 charactersAccepted, then cut to the first 26 alphanumeric characters

On Adyen, a payment always succeeds and bad data disappears quietly. On Stripe, an arithmetic error is loud by default, but a long or generic product name reaches Visa without any warning. On both, the cost only shows up later, as a higher interchange program on the fee report. Adyen also does not accept ESD corrections after the payment is processed, so a fix only helps future payments.

How to see whether a sale qualified

Neither gateway returns a "qualified" flag on the payment.

On Adyen, turn on Include ESD Validation Result in your webhook settings. Each payment then reports what Adyen received and what it submitted to Visa or Mastercard, with the reasons for anything it dropped. A payment where received is L3 and submitted is L2 or empty means your data never reached the network. For the cost side, add the ICSF details column to the Payment accounting report: it shows the interchange program of each payment.

On Stripe, use the transaction-level fees report, which shows the interchange of each charge and only exists on Interchange++ pricing. The CEDP report in Network Cost Insights shows each account's Visa CEDP verification status and the errors found in its data. It updates around the start of each month, with data from two months earlier.

Adyen tells you per payment what was dropped. Stripe tells you per account how Visa sees your data. On both, network costs can be revised up to two months after the sale, so wait a few weeks before judging a change.

What is the same on both

The card network rules do not change with the gateway:

  • Level 2 and Level 3 rates apply to commercial cards only. Consumer cards and regulated debit do not change rate with this data.
  • On Visa, only Level 3 counts, through Product 3 and CEDP. On Mastercard, Level 2 reaches Data Rate II on Business, Corporate and Purchasing cards, and Level 3 reaches Data Rate III on Corporate and Purchasing cards only.
  • Some merchant categories cannot reach the lower rates. Each gateway publishes the list it applies, and the lists are close but not identical.
  • Visa reviews a merchant's data over time before verifying it under CEDP, whichever gateway sends it.

The rates at stake on a typical B2B sale taken online are the same on both:

NetworkWithout qualifying dataWith Level 3
Visa Corporate and PurchasingCard Not Present, 2.70% + $0.10Product 3, 1.75% + $0.10
Mastercard Large Market CreditData Rate I, 2.70% + $0.10Data Rate III, 1.90% + $0.10

Sources: Visa USA Interchange Reimbursement Fees, effective October 24, 2026; Mastercard 2026-2027 U.S. Region Interchange Programs and Rates, effective April 17, 2026.

What to do on each

On Adyen:

  1. Confirm you are on Interchange++ pricing.
  2. Send ESD in enhancedSchemeData.levelTwoThree before moving to Checkout API v72.
  3. Turn on the ESD validation result in webhooks and track received against submitted.
  4. Add ICSF details to the Payment accounting report and read it monthly.

On Stripe:

  1. Confirm you are on Interchange++ pricing.
  2. Send line items on the PaymentIntent with API version 2025-10-29.clover or later.
  3. Put the specific item first in the product name, since only 26 characters reach Visa.
  4. Read the transaction-level fees report and the CEDP report monthly.

For the details of each gateway, see Adyen Enhanced Scheme Data (ESD) for Level 2 and Level 3 and Stripe Level 2 and Level 3 data for B2B payments. For the network rules behind both, see Visa CEDP 2026: requirements, fees and verified status.

Check your own sales

Whether you accept corporate cards on Adyen or Stripe, run a free diagnostic at tierback.com. Upload your Adyen Payment accounting report or your Stripe transaction-level fees report: the diagnostic finds the commercial card sales that settled above the data rates and estimates what that cost.

Free diagnostic

See what last month cost you.

Upload an Adyen or Stripe fee report. The diagnostic shows the rate each commercial card sale paid and the best rate its card and MCC allow.

Allow analytics cookies? Privacy